Road Marking Paint WB

High-performance, water-based acrylic road marking paint designed for concrete and asphalt surfaces. Provides durable, fast-drying, and environmentally friendly markings with excellent adhesion and visibility.

Product uses:

Roadways, highways, and parking lots.
Pedestrian crossings and safety zones.
Industrial floors and sports courts.

Properties:

Eco-Friendly: Low VOC, water-based formulation with minimal environmental impact.
Fast Drying: Touch-dry within 15–30 minutes, enabling quick reopening of roads.
Excellent Adhesion: Strong bond to asphalt and concrete surfaces.
Durability: Resistant to abrasion, weathering, and UV exposure.
High Visibility: Bright colors with good opacity for day and night visibility.
Easy Application: Compatible with airless spray, roller, or brush.
Non-Flammable: Safer storage and handling compared to solvent-based paints.
Cost-Effective: High coverage rate and reduced maintenance cycles

for Solvent based road marking please check our Road Marking Paint CR

Please visit our FaceBook Page for more products

Click to enlarge

Previous product

Top Floor 900 C

Back to products

Next product

Top Roof 500

Category: Special products Tags: Acrylic, Fast_drying, Road_marking_Paint, ttccoating, UV_Resistance, water_based

Product Description
Technical Data Sheets

Product Description

Technical Data Sheets

For Englsi Data sheet please press on the link:Road Marking Paint WB For Arabic Data sheet please press the link: Road Marking Paint WB Arabic

منتجات ذات صله

Proof Guard AC 111

Proof Guard AC 111 A synthetic, solvent-based elastic coating that forms a seamless, non-porous, watertight film that repels water and

Quick view

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.

Top Floor FC 300-SF

It is a two component heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish. It is hard wearing epoxy floor coating offering excellent resistance to chemicals, solvents and oils.

Duratrax 500

Duratrax 500 is a single-component, water-based floor coating formulated with pure acrylic binder. It provides a fast-drying, decorative, and durable finish for asphalt, concrete, and cement surfaces. Designed for interior and exterior use, it withstands vehicle traffic and is applied over epoxy transparent primer for optimal adhesion.

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.

Top Floor PU 100 SB

One component, non-yellowing, aliphatic, moisture curing, polyurethane gloss coating. The product is UV resistance and have very good chemical and mechanical characterizes.

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.

Topthane PU 55700

An acrylic polyurethane resin – aliphatic isocyanate based, two-component, gloss aliphatic polyurethane topcoat, it is High-performance topcoat with excellent adhesion, elasticity, UV resistance, gloss retention, and resistance to corrosive and marine atmospheres.

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.

Top Floor Tex

A one component solvent-based cold applied air drying thermoplastic acrylic floor coating formulated with anti-slip properties.

Topxy Metal Primer 1500

A high-performance, two-component epoxy-based primer designed to deliver exceptional corrosion resistance on metal substrates. Engineered for superior structural integrity, it offers outstanding resistance to abrasion and chemicals. Ideal for application on bare or sandblasted metal surfaces, the product provides enhanced protection against corrosion in demanding environments.

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.

Top sealer WR 7000-SB

Silicone based, solvent borne colorless surface protector and water repellent which prevents rainwater to flow in, by penetrating underneath the surface.

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Top Floor FC 200-SB

A two pack semi-gloss abrasion and impact resistant finish for concrete, steel, non-ferrous metals and asbestos cement. In areas prone to slip risk, you can further improve the slip resistance by using anti-slip additive. It is a solvent-based Epoxy professional floor coating with high solids, epoxy coating designed for high traffic areas on concrete floors in mild to moderate environments.

Top Floor 90-CR

Top Floor 90-CR is a high-performance, single-component floor coating. based on chlorinated rubber. The product is weather resistance and have

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.