Click to enlarge
Previous product
Poly Clear PU 090
Poly Clear PU 090
Back to products
Next product
NanoCure 2K
NanoCure 2K

Duratrax 500

Duratrax 500 is a single-component, water-based floor coating formulated with pure acrylic binder. It provides a fast-drying, decorative, and durable finish for asphalt, concrete, and cement surfaces. Designed for interior and exterior use, it withstands vehicle traffic and is applied over epoxy transparent primer for optimal adhesion.

Category: Tags: , , , , , ,
Product Description

Duratrax 500 is a single-component, water-based floor coating formulated with pure acrylic binder. It provides a fast-drying, decorative, and durable finish for asphalt, concrete, and cement surfaces. Designed for interior and exterior use, it withstands vehicle traffic and is applied over epoxy transparent primer for optimal adhesion.

Application Areas:

  • Parking lots and garages.
  • Industrial floors and warehouses
  • Asphalt coatings exposed to traffic
  • Decorative concrete surfaces in interior/exterior spaces

Properties:

  • Water-based, eco-friendly formulation
  • Pure acrylic binder for durability and flexibility
  • Fast drying, ready-to-use single component
  • Excellent adhesion to epoxy-primed substrates
  • Resistant to abrasion and vehicle traffic
  • UV resistance
  • Decorative finish for asphalt and concrete surfaces

for other products for flooring please visit our section for epoxy and polyurethane floor coating

please visit our facebook page

Technical Data Sheets
For English data sheet please press on the link : Duratrax 500 For Arabic data sheet please press on the link : Duratax 500 Arabic

منتجات ذات صله

Close

TOP MASTIC EPOXY 450

A two-component, high-solids epoxy primer formulated with zinc phosphate anti-corrosive pigments. Engineered for high-build application, it delivers rapid drying and excellent adhesion to ferrous substrates. Upon curing, it forms a mechanically robust and chemically resistant film that provides long-term Protection against corrosion, even in aggressive industrial or marine environments.    
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Proof Guard AC 111

Proof Guard AC 111 A synthetic, solvent-based elastic coating that forms a seamless, non-porous, watertight film that repels water and
Quick view
Close

Road Marking Paint WB

High-performance, water-based acrylic road marking paint designed for concrete and asphalt surfaces. Provides durable, fast-drying, and environmentally friendly markings with excellent adhesion and visibility.
Quick view
Close

InjecSeal 200

Injectsela 200 is a solvent-free, two-component epoxy resin system designed for structural injection applications. Its low viscosity ensures deep penetration
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Close

Road Guard 2K

A high-performance, solvent-free, two-component methyl methacrylate (MMA) road marking paint designed for long-lasting visibility and mechanical resistance. Suitable for highways, urban roads, parking lots, and industrial zones.
Quick view
Close

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.
Quick view
Close

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Quick view
Close

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.
Quick view
Close

Topxy Mortar SF-075

It is two component, solvent free epoxy resin based repair, anchorage and fitting mortar. The product is fast drying anchorage, casting and repair mortar.
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Thermal Screed

Thermal Screed It is a screed material that allows the surface to breathe and provides heat, sound and fire insulation thanks to the natural lightweight aggregates with a porous structure in its cement-based mixture.
Quick view
Close

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.  
Quick view
Close

Top Tar EP-1000

Coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity. It has good resistance to immersion to soil chemicals. It has excellent durability against moisture and water.
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Close

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.
Quick view