Polyurethane Based Waterproofing Products

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Proof Guard PL 200 – C

Two component, fast curing cold applied polyurea waterproofing membrane. It produces a durable and highly elastic membrane. If it is used for exposed, aliphatic top coat must be applied.

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.

Proof Guard PU 500 plus

One component, low viscosity, polyurethane based, liquid waterproofing membrane. Creates a durable and elastic layer by curing with the humidity in the air.  The Product is suitable for spraying application due to its low viscosity.

Proof Tile Primer

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air

Top Seal PU 711-PO

Two component, self levelling pourable polyurethane joint sealant which has also excellent petroleum derivate resistant.

Top Seal PU 900-INJ

One component low viscosity, closed cell, polyurethane injection which gives a blowing reaction with water. It is polyurethane waterproofing material which is specially designed for sealing of pressurized or non-pressurized water leaking from the cracks on the concrete surfaces.

Topflex PU 25

One component, polyurethane based isolation and filling material. Creates an extremely elastic film curing with the humidity in the air. Easily applied in a wide temperature range. Suitable for vertical and horizontal joints.

Topflex PU 50

A polyurethane based, single component, UV and weathering resistant elastomeric joint sealant.