Floor coatıng products are group of products designed for floor application. Those products have many properties like :
- Chemical resistance.
- Resistant to mechanical wear
- High adhesion to concrete and metal floors
- Super resistant to ordinary water and sea water
These products are available in several types, such as epoxy, polyurethane, acrylic, and other compounds
Poly Clear PU 080
low viscosity single component solvent based moisture cure polyurethane primer especially formulated to significantly enhance the adhesion of polyurethane Range of waterproofing coatings and polyurethane joint sealants , with the most common construction substrates. Poly Clear PU 080 can be also used as a sealer and dust-proofer over dry concrete substrates.
Polytop Clear PU 060
Two-component polyurethane based and elastic, hard waterproofing product. Especially used in waterproofing of glazed tiles and glossy surfaces such as ceramics, marble, granite and glass; After drying, it forms a transparent, tough elastic and seamless layer. It is used for waterproofing without damaging the existing coating especially in living places such as balconies and terraces.
Top Clear AC-7070
A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.
Top Cryl MMA 5011 SL
It is a methyl methacrylate (MMA) based, self-leveling floor covering used indoors and outdoors, which can be ready for use approximately 1 hour after the application. Minimum 2-3 mm. thickness applied. It is produced in various RAL colors. It has a quick drying time (Average 1 hour). It is very long lasting. It is applied from wall to wall joint less and non-porous. It is easily repaired. When renewal is required, it is not necessary to remove the old coating underneath. It stretches and works with the underlying surface.
Top Floor CM 045
It is a two-component, non-cracking decorative colored water-based acrylic asphalt & concrete paint with high UV resistance, high mechanical strength that provides very good adherence to the asphalt& concrete surface it is applied to, consisting of powder component containing high strength special aggregate and mineral hardener and a special acrylic polymer-based colored liquid component
Top Floor CM 3-10
It is a high-strength, normal-setting, cement-based, self-leveling underlayment, for use over interior concrete, plywood and other approved floor surfaces. The product convenient and easy to use. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. This normal setting underlayment can be applied up to 10 mm thick in one pour and seeks its own level in hours.