Click to enlarge
Previous product
Topxy Zinc E-811
Back to products
Next product
Top Cryl MMA 5011 SL

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Category: Tags: , , , , , ,
Description

Pool Paint is a two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Properties

  • Extremely Durable In Fresh & Salt Water
  •  waterproof.
  • Good chemical resistance.
  • Impermeable to water and other liquids.
  • Resistant To Common Pool Chemicals
  • UV resistance

 

 

Technical Data Sheets
English Data sheet: Pool Paint Arabic Data sheet : Pool Paint Arabic

Related products

Close

Top Seal PU 900-INJ

One component low viscosity, closed cell, polyurethane injection which gives a blowing reaction with water. It is polyurethane waterproofing material which is specially designed for sealing of pressurized or non-pressurized water leaking from the cracks on the concrete surfaces.
Quick view
Close

Top Floor PU 100 SB

One component, non-yellowing, aliphatic, moisture curing, polyurethane gloss coating. The product is UV resistance and have very good chemical and mechanical characterizes.
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Close

Top Seal PU 711-PO

Two component, self levelling pourable polyurethane joint sealant which has also excellent petroleum derivate resistant.
Quick view
Close

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Topflex PU 50

A polyurethane based, single component, UV and weathering resistant elastomeric joint sealant.
Quick view
Close

Top Floor TS 700-WB

Two-pack high build water dispersed epoxy resin, which form a dust-proof, easily cleaned surface, which is resistant to most oils and liquids. The product is water based and low odor. It can also be used as a final coating and sealer for epoxy floor screeds to provide a more durable and easily cleaned surface where high impact is desirable. The product can be used as primer on damp areas or concrete surfaces that contains humidity.
Quick view
Close

Top Floor PU 200 -SB

An aliphatic isocyanate based , two component, solvent borne, UV resistant, glossy top coating which is scratch resistant and have high color stability and have high mechanical abrasion  resistant.
Quick view
Close

Top Floor FC 300-SF

It is a two component heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish.  It is hard wearing epoxy floor coating offering excellent resistance to chemicals, solvents and oils. 
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Close

Top Fix CR 117-2K

Top Fix CR 117-2K It is a two-component chemical material used in both passive and active waterproofing. The material interacts
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Hammertone Paint  is a fast-drying, solvent-based topcoat paint with a hammerton pattern. The product can be applied directly on metal without primer.
Close

Hammertone Paint

Hammertone Paint  is a fast-drying, solvent-based topcoat paint with a hammerton pattern, containing an anticorrosive pigment mixture with a modified
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.
Quick view
Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesionfor other coats.
Close

Proof Tile Primer

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the
Quick view
Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view