Click to enlarge
Previous product
Topxy Zinc E-811
Back to products
Next product
Top Prime MMA 2011

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Category: Tags: , , , , , ,
Product Description

Pool Paint is a two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Properties

  • Extremely Durable In Fresh & Salt Water
  •  waterproof.
  • Good chemical resistance.
  • Impermeable to water and other liquids.
  • Resistant To Common Pool Chemicals
  • UV resistance

 

 

Technical Data Sheets
English Data sheet: Pool Paint Arabic Data sheet : Pool Paint Arabic

منتجات ذات صله

Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Close

Top Floor PU 200 -SB

An aliphatic isocyanate based , two component, solvent borne, UV resistant, glossy top coating which is scratch resistant and have high color stability and have high mechanical abrasion  resistant.
Quick view
Close

Thermal Roof Coating

One component elastomeric acrylic resin-based flexible acrylic waterproofing & thermal insulation coating.
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Clear PU 7000 WB

Top Clear PU 7000 WB Is a water-based heavy-duty aliphatic polyurethane Floor transparent coating. The product is two component waterborne
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Close

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.
Quick view
Close

Top Floor FC 200-SB

Two-pack epoxy floor coating offering good chemical resistance, durability and available in a variety of colors.
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Close

Top Seal PU 900-INJ

A single component, Solvent Free, polyurethane based injection material, specifically designed for sealing and waterproofing the joints and cracks in concrete subjected to structural movements. The single component system reacts with water to form foam that expands filling the void and forming a tight, impermeable elastomeric seal, stopping the water flow.
Quick view
Close

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.
Quick view
Close

Top Floor FC 300-SF

It is a two component heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish.  It is hard wearing epoxy floor coating offering excellent resistance to chemicals, solvents and oils. 
Quick view
Close

Top Floor 90-CR

Top Floor 90-CR is a high-performance, single-component floor coating. based on chlorinated rubber.  The product is weather resistance and have
Quick view
Close

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.    
Quick view
Close

Topxy Metal Primer 1500

A high-performance, two-component epoxy-based primer designed to deliver exceptional corrosion resistance on metal substrates. Engineered for superior structural integrity, it offers outstanding resistance to abrasion and chemicals. Ideal for application on bare or sandblasted metal surfaces, the product provides enhanced protection against corrosion in demanding environments.
Quick view
Close

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.
Quick view
Close

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Quick view