Click to enlarge
Previous product
Top Floor 600-SF
Back to products
Next product
Top Floor FB 700

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.

Category: Tags: , , , , , , ,
Product Description

Top Floor 650-MT  (Moisture tolerant epoxy primer )

Two component solvent free, moisture tolerant epoxy Primer designed to be applied to concrete with residual moisture or green concrete.

Recommended use:

  • Barrier against moisture and water vapor on damp concrete surfaces.
  • Surface primer before polyuria, epoxy and polyurethane coatings.
  • Prevents creation of osmosis blisters which occurs due to negative side pressur
  • Create a moisture barrier to prevent issues like blistering or delamination.
  • Improve adhesion for subsequent coatings like polyurethane, polyurea, or epoxy topcoats.

Where to use the pruduct:

  • On new concrete that hasn’t fully cured
  • In basements or ground-level slabs with high humidity
  • Where damp-proof membranes are missing or compromised
  • Before applying decorative or industrial resin flooring systems

 

 

 

Technical Data Sheet
English Data Sheet:Top Floor 650-MT English Arabic Data Sheet:Top Floor 650-MT-Arabic  

منتجات ذات صله

Close

Top Floor ORP 6000

It is a high viscosity, solvent free, two component, colored, orange peel textured, multi-purpose epoxy based coating.
Quick view
Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Close

Top Floor FC 200-SB

Two-pack epoxy floor coating offering good chemical resistance, durability and available in a variety of colors.
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

Top sealer WR 7000-SB

Silicone based, solvent borne colorless surface protector and water repellent which prevents rainwater to flow in, by penetrating underneath the surface.
Quick view
Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Two-pack water dispersed epoxy Floor Coating, The product have Excellent adhesion to concrete surface and damp but not wet concrete.
Close

Top Floor FC 250-WB

Two-pack water dispersed epoxy Floor Coating, The product have Excellent adhesion to concrete surface and damp but not wet concrete. The Product have exceptional floor protection—and zero VOCs and have High-performance coating—for concrete floors in moderate to severe industrial settings. exceptionally hard-wearing, low-odour heavy duty floor coating ideal for heavy traffic areas. The product have very good outstanding resistance to oil, chemicals, solvents and abrasion. The product is easy-to-clean and Prevents the dusting of concrete surfaces.
Quick view
A colored Epoxy flooring flakes product that may be mixed with a variety of materials such as clear or pigmented gel coat, polyurethane, or epoxy and sprayed directly onto the desired surface.
Close

Topxy Flakes

A flat, acrylic flake product that may be mixed with a variety of materials such as clear or pigmented gel coat, polyurethane, or epoxy and sprayed directly onto the desired surface. Depending on the application, Stone Flakes may be backed with fiberglass or cast polymers.  
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Topxy Mortar SF-075

It is two component, solvent free epoxy resin based repair, anchorage and fitting mortar. The product is fast drying anchorage, casting and repair mortar.
Quick view
A two component low viscous Marble &  granites Epoxy Resin used to fuse natural as well as artificial stone to fill porosity, hairline crack, major crack and hole.
Close

Topxy Resin 800 SF

A two component low viscous liquid used to fuse natural as well as artificial stone to fill porosity, hairline crack, major crack and hole. System will also enhance the color of natural stone as well as improve gloss.
Quick view
Close

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.
Quick view
Close

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.  
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view
Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view