Click to enlarge
Previous product
Top Floor 650-MT
Top Floor 650-MT
Back to products
Next product
Top Floor FC 200-SB
Top Floor FC 200-SB

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Category: Tags: , , , , , , ,
Product Description

Top Floor FB 700 (Solvent Free Epoxy Concrete Primer)

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Recommended use:

Top Floor FB 700 is for priming low to medium absorbent substrates,  concrete substrates, cement screeds and epoxy mortars.

Areas of Use:

Warehouse floors, Chemical plants, Textiles & Paper industries, Laboratories, Canneries, Workshops floor…etc.

 

 

 

Technical Data Sheets
English Data Sheet: Top Floor FB 700 English Arabic Data Sheet : Top Floor FB 700 Arabic

منتجات ذات صله

Close

Topxy Metal Primer 1500

A high-performance, two-component epoxy-based primer designed to deliver exceptional corrosion resistance on metal substrates. Engineered for superior structural integrity, it offers outstanding resistance to abrasion and chemicals. Ideal for application on bare or sandblasted metal surfaces, the product provides enhanced protection against corrosion in demanding environments.
Quick view
Close

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Close

VoltBond SF

A two-component, solvent-free, conductive epoxy primer designed for use in ESD “Electrostatic Discharge” flooring systems. It provides excellent adhesion to concrete substrates while ensuring reliable electrical conductivity for subsequent antistatic or conductive coatings.
Quick view
Close

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Quick view
Close

Carpet Bond SF

Two-component, solvent-free epoxy binder designed for stone carpet / decorative aggregate provides strong adhesion, durability, and chemical resistance flooring systems.
Quick view
A two component low viscous Marble &  granites Epoxy Resin used to fuse natural as well as artificial stone to fill porosity, hairline crack, major crack and hole.
Close

Topxy Resin 800 SF

A two component low viscous liquid used to fuse natural as well as artificial stone to fill porosity, hairline crack, major crack and hole. System will also enhance the color of natural stone as well as improve gloss.
Quick view
Close

Thermocem 130

A high-performance, solvent-free, self-leveling floor coating based on epoxy resin and Portland cement modification. Engineered to deliver exceptional mechanical strength, superior resistance to thermal shock, and robust chemical durability, it is ideally suited for demanding industrial environments and substrates exposed to aggressive conditions
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

TOP MASTIC EPOXY 450

A two-component, high-solids epoxy primer formulated with zinc phosphate anti-corrosive pigments. Engineered for high-build application, it delivers rapid drying and excellent adhesion to ferrous substrates. Upon curing, it forms a mechanically robust and chemically resistant film that provides long-term Protection against corrosion, even in aggressive industrial or marine environments.    
Quick view
A colored Epoxy flooring flakes product that may be mixed with a variety of materials such as clear or pigmented gel coat, polyurethane, or epoxy and sprayed directly onto the desired surface.
Close

Topxy Flakes

A flat, acrylic flake product that may be mixed with a variety of materials such as clear or pigmented gel coat, polyurethane, or epoxy and sprayed directly onto the desired surface. Depending on the application, Stone Flakes may be backed with fiberglass or cast polymers.  
Quick view
Close

Top Floor SL 1000

High quality self-leveling Flow applied three component coating for application to new and existing concrete & metal floors. It provides smooth, easily cleaned surfaces which is resistant to dirt, moisture, oil, and light-medium abrasion and chemical attack.
Quick view
Close

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.  
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Topflex PU 25

Topflex PU 25 Polyurethane Mastic is a high-performance, one-component sealant designed for flexible joint sealing and bonding applications. It cures upon exposure to atmospheric moisture to form a durable, elastic seal resistant to weathering, chemicals, and mechanical stress. Ideal for use in construction, automotive, and industrial settings.

Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Top Floor 800 SF

Top Floor 800 SF This is a two-component primer based on novolac (phenolic) epoxy resin. It is formulated with a
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view