ProEdge 800

ProEdge 800 is a modified alkyd-based coating engineered for borders, columns, and walls. It combines excellent adhesion, fast drying, and durable protection, making it ideal for architectural and decorative applications.

Product uses:

Borders and decorative edges in residential and commercial buildings.
Columns and vertical architectural elements requiring durable finish.
Interior walls where quick drying and strong adhesion are critical.
Masonry, plaster, and concrete surfaces with high traffic exposure.
Renovation projects needing fast turnaround and professional appearance.
Protective coating for institutional buildings (schools, hospitals, offices).

Properties:

High adhesion to concrete, plaster, and masonry surfaces
Quick-drying formulation for faster project completion
Smooth, uniform finish with professional appearance
Excellent durability for interior and exterior use
Easy application by brush, roller, or spray.

For other special products please visit our section for special products

Please visit our Instagram page for more information about our produts

Click to enlarge

Previous product

Topxy Mortar SF -100

Back to products

Next product

Top Roof 500

Category: Special products Tags: Exterior_Floor_paint, Protective_coatings, UV_Resistance

Product Description
Technical Data Sheets

Product Description

Technical Data Sheets

For English data sheet please press on the link : ProEdge 800 For Arabic data sheet please press on the link ProEdge 800 Arabic

منتجات ذات صله

Top Seal PS 812-PO

A highly elastic, two-component joint sealant based on liquid polysulfide polymer. The system cures through a chemical reaction initiated by a catalyst, forming a durable, flexible seal ideal for dynamic joint movements.

Quick view

InjecSeal 200

Injectsela 200 is a solvent-free, two-component epoxy resin system designed for structural injection applications. Its low viscosity ensures deep penetration

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.

CrystalShield

A transparent, solvent-free aliphatic polyurethane sealer designed to penetrate and close pores in stone carpet systems and decorative aggregates.

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.

EcoSteel WB

A water-based, eco-friendly coating designed for industrial and architectural metal surfaces. It offers excellent adhesion, corrosion resistance, and color versatility, making it suitable for both protective and decorative applications

ProShield PU 587 W

High-performance polyurethane-based system, engineered through advanced resin modification and the incorporation of specialized additives and fillers. Designed for demanding applications in both wet and dry environments, it delivers a durable, non-slip surface that ensures safety under diverse conditions. Its formulation provides exceptional chemical resistance, safeguarding against exposure to acids, alkalis, oils, and cleaning agents. The result is a versatile protective solution that combines mechanical strength, long-term reliability, and user safety — making it ideal for industrial flooring, commercial facilities, and environments requiring superior performance.

Topxy NF-4111

A solvent free, two components, high build, polyamine cured epoxy phenolic coating designed to protect substrates against severe chemical attack. Low viscosity and excellent adhesion characteristics ensure a tight bond to properly prepared concrete and steel surfaces. The product has High chemical resistance, low permeability, resist chipping or cracking and has an excellent Abrasion & Corrosion resistant. The product have excellent resistance to water, crude oil, diesel fuel, jet fuel (JP-8, Jet A1) and unleaded gasoline

Road Marking Paint WB

High-performance, water-based acrylic road marking paint designed for concrete and asphalt surfaces. Provides durable, fast-drying, and environmentally friendly markings with excellent adhesion and visibility.

Road Guard 2K

A high-performance, solvent-free, two-component methyl methacrylate (MMA) road marking paint designed for long-lasting visibility and mechanical resistance. Suitable for highways, urban roads, parking lots, and industrial zones.

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.

Thermal Screed

Thermal Screed It is a screed material that allows the surface to breathe and provides heat, sound and fire insulation thanks to the natural lightweight aggregates with a porous structure in its cement-based mixture.

Top Proof BT 100-A

Single-Component, Bitumen Based Waterproofing Material containing reflective aluminum.

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.

Duratrax

Duratrax is a high-performance, single-component acrylic coating designed for electric vehicle charging station floors. Its solvent-based formulation delivers excellent adhesion, fast drying, and long-lasting durability on concrete and asphalt substrates. Ideal for high-traffic zones requiring vibrant visibility, chemical resistance, and weather resilience.

UNIBIND PU 407

A single-component polyurethane resin designed specifically as a binder for SBR & EPDM granules in flooring applications. It offers a high-performance solution for creating durable, elastic, and UV & weather-resistant surfaces across a wide range of environments.

Top Clear PU 7000 WB

Is a water-based heavy-duty aliphatic polyurethane Floor transparent coating. The product is two component waterborne transparent coating that is formulated for use on high foot traffic residential and commercial floor. It exhibits an extra durable, mar and abrasion resistant, non-yellowing, glossy film. It has completely zero-odor and virtually no VOC while having the same durability and UV resistance properties of its solvent-based counterpart which makes it the ideal choice of paint for Concert, wood, and any kind of painted floor.

Top Floor 90-CR

Top Floor 90-CR is a high-performance, single-component floor coating. based on chlorinated rubber. The product is weather resistance and have

Duratrax 500

Duratrax 500 is a single-component, water-based floor coating formulated with pure acrylic binder. It provides a fast-drying, decorative, and durable finish for asphalt, concrete, and cement surfaces. Designed for interior and exterior use, it withstands vehicle traffic and is applied over epoxy transparent primer for optimal adhesion.