Click to enlarge
Previous product
Topxy Zinc E-811
Topxy Zinc E-811
Back to products
Next product
Top Prime MMA 2011
Top Prime MMA 2011

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Category: Tags: , , , , , ,
Product Description

Pool Paint is a two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.

Properties

  • Extremely Durable In Fresh & Salt Water
  •  waterproof.
  • Good chemical resistance.
  • Impermeable to water and other liquids.
  • Resistant To Common Pool Chemicals
  • UV resistance

 

 

Technical Data Sheets
English Data sheet: Pool Paint Arabic Data sheet : Pool Paint Arabic

منتجات ذات صله

Close

Top Floor FC 200-SB

A two pack semi-gloss abrasion and impact resistant finish for concrete, steel, non-ferrous metals and asbestos cement. In areas prone to slip risk, you can further improve the slip resistance by using anti-slip additive. It is a solvent-based Epoxy professional floor coating with high solids, epoxy coating designed for high traffic areas on concrete floors in mild to moderate environments.
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Close

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Close

Top Clear PU 7000 WB

Is a water-based heavy-duty aliphatic polyurethane Floor transparent coating. The product is two component waterborne transparent coating that is formulated for use on high foot traffic residential and commercial floor. It exhibits an extra durable, mar and abrasion resistant, non-yellowing, glossy film. It has completely zero-odor and virtually no VOC while having the same durability and UV resistance properties of its solvent-based counterpart which makes it the ideal choice of paint for Concert, wood, and any kind of painted floor.
Quick view
Close

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.    
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Top Seal PS 812-PO

A highly elastic, two-component joint sealant based on liquid polysulfide polymer. The system cures through a chemical reaction initiated by a catalyst, forming a durable, flexible seal ideal for dynamic joint movements.
Quick view
Close

Topxy NF-4111

A solvent free, two components, high build, polyamine cured epoxy phenolic coating designed to protect substrates against severe chemical attack. Low viscosity and excellent adhesion characteristics ensure a tight bond to properly prepared concrete and steel surfaces. The product has High chemical resistance, low permeability, resist chipping or cracking and has an excellent Abrasion & Corrosion resistant. The product have excellent resistance to water, crude oil, diesel fuel, jet fuel (JP-8, Jet A1) and unleaded gasoline
Quick view
Close

Proof Tile Primer

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view
Close

TOP MASTIC EPOXY 450

A two-component, high-solids epoxy primer formulated with zinc phosphate anti-corrosive pigments. Engineered for high-build application, it delivers rapid drying and excellent adhesion to ferrous substrates. Upon curing, it forms a mechanically robust and chemically resistant film that provides long-term Protection against corrosion, even in aggressive industrial or marine environments.    
Quick view
Close

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.
Quick view