Click to enlarge
Previous product
Top Roof 500
Top Roof 500
Back to products
Next product
Top Poly MS
Top Poly MS

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.

 

Category: Tags: , , ,
Product Description

Top Roof G (Mineral & Polymer based waterproofing)

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.

Recommended use: Top Roof G (Mineral & Polymer based waterproofing)

  • As a waterproofing coating on concrete roofs & terraces.
  • As a decorative and waterproofing coating on concrete walkways.
  • As a protection coat over asphalt pavements.
  • The product can be used as Tennis courts & sport areas paint.
  • Can be used as decorative coating in parks & gardens.
  • can be used as wet areas insulation.
  • Under the ceramic surfaces in terraces, Balcones and wet areas like bathrooms and kitchens.

 

Technical Data Sheets
For Englsıh Data Sheet please press on the link:Top Roof G For Arabic Data sheet Please press on the link: Top Roof G Arabic

منتجات ذات صله

Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Close

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.
Quick view
It is a water based, acrylic  based dense concentrated Sealer with high strength penetration and adherence.
Close

Acrylic Concentrated Sealer

It is a water based, acrylic  based dense concentrated primer with high strength penetration and adherence. The product is odorless and  creates a binding bridge between paint and surface and  maximizes adherence of paint on surface and decreases the absorbency of the surface it is applied to. It prevents color waives occurring in top coat paint on surfaces with various characteristics of absorbency. Reduces the consumption of paint significantly. Performs high penetration ability; environmental friendly.
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
Close

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.    
Quick view
Close

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Top Floor FC 200-SB

Two-pack epoxy floor coating offering good chemical resistance, durability and available in a variety of colors.
Quick view
Close

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.
Quick view
Close

Weather Shield SI- 1150

High-quality, water-based exterior paint, the product is pure Acrylic copolymer resins and modified silicone resin based paint. The product is weather resistant, water repellent, have good resistance to bacterial growth, high hiding power and have color retention properties.
Quick view
Close

TOP MASTIC EPOXY 450

A two-component, high-solids epoxy primer formulated with zinc phosphate anti-corrosive pigments. Engineered for high-build application, it delivers rapid drying and excellent adhesion to ferrous substrates. Upon curing, it forms a mechanically robust and chemically resistant film that provides long-term Protection against corrosion, even in aggressive industrial or marine environments.    
Quick view
Close

Topxy Mortar SF-075

It is two component, solvent free epoxy resin based repair, anchorage and fitting mortar. The product is fast drying anchorage, casting and repair mortar.
Quick view
Close

TOP Guard 100

Acrylic elastic waterproofing coating. it is one component elastomeric acrylic resin-based flexible acrylic waterproofing coating. The product have waterproofing impervious and elongation properties in addition to the strong bonding on most substrates. It forms a tough, flexible and durable coating which is resistant to UV and other weathering agents.
Quick view
Close

Top Guard 200

A fiber, elastomer waterproofing, based on an Acrylic resin. After its application, it forms an enhanced layer thickness membrane which is moisture and stagnant water resistant. The dry film has excellent resistance to deformation and to temperature fluctuations absorbing thus the structural movements of the substrate. Its innovative composition prevents dust and dirt to adhere on the applied surface maintaining thus its whiteness over time.
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Close

Top Poly MS

Single component, ready-to-use, solvent and isocyanate free, UV resistant, high technology coating and waterproofing material, produced with MS Polymer hybrid technology.
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Ready-to-use internal & external plaster water based bonding primer with added aggregate to provide a key prior to plastering on smooth surfaces.
Close

Top Bonding Primer

A one component, ready-to-use internal & external plaster bonding primer with added aggregate to provide a key prior to plastering on smooth surfaces. The product is ready to use, one coat application and it is pigmented to identify treated areas and it contains sand/aggregate to provide plaster key.
Quick view