Road Marking Paint WB

High-performance, water-based acrylic road marking paint designed for concrete and asphalt surfaces. Provides durable, fast-drying, and environmentally friendly markings with excellent adhesion and visibility.

Product uses:

Roadways, highways, and parking lots.
Pedestrian crossings and safety zones.
Industrial floors and sports courts.

Properties:

Eco-Friendly: Low VOC, water-based formulation with minimal environmental impact.
Fast Drying: Touch-dry within 15–30 minutes, enabling quick reopening of roads.
Excellent Adhesion: Strong bond to asphalt and concrete surfaces.
Durability: Resistant to abrasion, weathering, and UV exposure.
High Visibility: Bright colors with good opacity for day and night visibility.
Easy Application: Compatible with airless spray, roller, or brush.
Non-Flammable: Safer storage and handling compared to solvent-based paints.
Cost-Effective: High coverage rate and reduced maintenance cycles

for Solvent based road marking please check our Road Marking Paint CR

Please visit our FaceBook Page for more products

Click to enlarge

Previous product

Top Floor 900 C

Back to products

Next product

Top Roof 500

Category: Special products Tags: Acrylic, Fast_drying, Road_marking_Paint, ttccoating, UV_Resistance, water_based

Product Description
Technical Data Sheets

Product Description

Technical Data Sheets

For Englsi Data sheet please press on the link:Road Marking Paint WB For Arabic Data sheet please press the link: Road Marking Paint WB Arabic

منتجات ذات صله

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.

Quick view

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.

Road Guard 2K

A high-performance, solvent-free, two-component methyl methacrylate (MMA) road marking paint designed for long-lasting visibility and mechanical resistance. Suitable for highways, urban roads, parking lots, and industrial zones.

Proof Guard AC 111

Proof Guard AC 111 A synthetic, solvent-based elastic coating that forms a seamless, non-porous, watertight film that repels water and

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.

TOP MASTIC EPOXY 450

A two-component, high-solids epoxy primer formulated with zinc phosphate anti-corrosive pigments. Engineered for high-build application, it delivers rapid drying and excellent adhesion to ferrous substrates. Upon curing, it forms a mechanically robust and chemically resistant film that provides long-term Protection against corrosion, even in aggressive industrial or marine environments.

Top Floor FC 200-SB

A two pack semi-gloss abrasion and impact resistant finish for concrete, steel, non-ferrous metals and asbestos cement. In areas prone to slip risk, you can further improve the slip resistance by using anti-slip additive. It is a solvent-based Epoxy professional floor coating with high solids, epoxy coating designed for high traffic areas on concrete floors in mild to moderate environments.

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.

Top Floor FC 300-SF

It is a two component heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish. It is hard wearing epoxy floor coating offering excellent resistance to chemicals, solvents and oils.

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.

Top Floor Tex

A one component solvent-based cold applied air drying thermoplastic acrylic floor coating formulated with anti-slip properties.

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.

Topthane PU 55700

An acrylic polyurethane resin – aliphatic isocyanate based, two-component, gloss aliphatic polyurethane topcoat, it is High-performance topcoat with excellent adhesion, elasticity, UV resistance, gloss retention, and resistance to corrosive and marine atmospheres.