Click to enlarge
Previous product
Top Floor 650-MT
Top Floor 650-MT
Back to products
Next product
Top Floor FC 200-SB
Top Floor FC 200-SB

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Category: Tags: , , , , , , ,
Product Description

Top Floor FB 700 (Solvent Free Epoxy Concrete Primer)

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Recommended use:

Top Floor FB 700 is for priming low to medium absorbent substrates,  concrete substrates, cement screeds and epoxy mortars.

Areas of Use:

Warehouse floors, Chemical plants, Textiles & Paper industries, Laboratories, Canneries, Workshops floor…etc.

 

 

 

Technical Data Sheets
English Data Sheet: Top Floor FB 700 English Arabic Data Sheet : Top Floor FB 700 Arabic

منتجات ذات صله

Close

VoltBond SF

A two-component, solvent-free, conductive epoxy primer designed for use in ESD “Electrostatic Discharge” flooring systems. It provides excellent adhesion to concrete substrates while ensuring reliable electrical conductivity for subsequent antistatic or conductive coatings.
Quick view
Close

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.
Quick view
Close

Topthane PU 55700

An acrylic polyurethane resin – aliphatic isocyanate based, two-component, gloss aliphatic polyurethane topcoat, it is High-performance topcoat with excellent adhesion, elasticity, UV resistance, gloss retention, and resistance to corrosive and marine atmospheres.
Quick view
Close

Top Floor 900 C

Two‑component, solvent‑free conductive epoxy primer provide excellent adhesion and electrical continuity for anti‑static and conductive flooring systems.
Quick view
Close

Top Floor ORP 6000

It is a high viscosity, solvent free, two component, colored, orange peel textured, multi-purpose epoxy based coating.
Quick view
Close

Top Floor 800 SF

Top Floor 800 SF This is a two-component primer based on novolac (phenolic) epoxy resin. It is formulated with a
Quick view
Close

Top Floor SL 1000

High quality self-leveling Flow applied three component coating for application to new and existing concrete & metal floors. It provides smooth, easily cleaned surfaces which is resistant to dirt, moisture, oil, and light-medium abrasion and chemical attack.
Quick view
Close

Floor Guard 100 SB

A pure resin‑based, single‑component epoxy floor coating designed for heavy‑duty applications. It is air‑drying, cold‑applied, and formulated to deliver exceptional impact resistance and long‑lasting durability.
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Close

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.
Quick view
Two-pack water dispersed epoxy Floor Coating, The product have Excellent adhesion to concrete surface and damp but not wet concrete.
Close

Top Floor FC 250-WB

Two-pack water dispersed epoxy Floor Coating, The product have Excellent adhesion to concrete surface and damp but not wet concrete. The Product have exceptional floor protection—and zero VOCs and have High-performance coating—for concrete floors in moderate to severe industrial settings. exceptionally hard-wearing, low-odour heavy duty floor coating ideal for heavy traffic areas. The product have very good outstanding resistance to oil, chemicals, solvents and abrasion. The product is easy-to-clean and Prevents the dusting of concrete surfaces.
Quick view
A colored Epoxy flooring flakes product that may be mixed with a variety of materials such as clear or pigmented gel coat, polyurethane, or epoxy and sprayed directly onto the desired surface.
Close

Topxy Flakes

A flat, acrylic flake product that may be mixed with a variety of materials such as clear or pigmented gel coat, polyurethane, or epoxy and sprayed directly onto the desired surface. Depending on the application, Stone Flakes may be backed with fiberglass or cast polymers.  
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

EpoGuard AS

EpoGuard AS is a two-component, solvent-free epoxy coating designed to provide durable, anti-static flooring protection. It offers excellent mechanical strength, chemical resistance, and conductivity control, making it ideal for sensitive environments such as electronic manufacturing, laboratories, and clean rooms.
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
Close

VoltFloor SL

A two-component, self-leveling, solvent-free epoxy conductive coating designed for use in ESD flooring systems. Applied over VoltBond SF primer, it provides a smooth, durable, and conductive surface that safely dissipates static charges to grounding points.
Quick view
Close

TOP MASTIC EPOXY 450

A two-component, high-solids epoxy primer formulated with zinc phosphate anti-corrosive pigments. Engineered for high-build application, it delivers rapid drying and excellent adhesion to ferrous substrates. Upon curing, it forms a mechanically robust and chemically resistant film that provides long-term Protection against corrosion, even in aggressive industrial or marine environments.    
Quick view
Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view