Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Click to enlarge
Previous product
Top Floor PU 200 -SB
Back to products
Next product
Topxy NF-4111

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.

Categories: , Tags: , , , ,
وصف المنتج

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100-150 micron per coat) as well as high builds (250 micron per coat).

Product Uses:
  • Potable water tanks (concrete or Metal)
  • Sea water tanks.
  • Water pipes
  • Valves coating
Properties: 
  • Corrosion, chemical and abrasion resistant
  • Solvent free – suitable for use in confined areas.
  • High build application.
  • Zero VOC
  • Easy to clean
Technical Data Sheets
English Data Sheet: Topxy Coating 5050 SF English Arabic Data Sheet: Topxy Coating 5050 SF Arabic

منتجات ذات صله

Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Close

Topxy MIO Mastic Primer

Epoxy-polyamine based, two component, high built coating containing micaceous iron oxide (MIO) and zinc phosphate, self priming mastic coating with low volatile organic content (VOC).
Quick view
Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Close

Top Fix CR 117-2K

Top Fix CR 117-2K It is a two-component chemical material used in both passive and active waterproofing. The material interacts
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Top Mastic Epoxy 450-AL

Epoxy-polyamine based, two component, zinc phosphate and aluminum pigment containing, high built, self priming mastic coating with low volatile organic content (VOC).
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Top Floor AC-8080

Top Floor AC-8080 One-component acrylic coating is based on solvent and designed to provide breathable, water-repellent protection for concrete surfaces.
Quick view
Hammertone Paint  is a fast-drying, solvent-based topcoat paint with a hammerton pattern. The product can be applied directly on metal without primer.
Close

Hammertone Paint

Hammertone Paint  is a fast-drying, solvent-based topcoat paint with a hammerton pattern, containing an anticorrosive pigment mixture with a modified
Quick view
Close

Topxy Metal Primer 1500

A two component, epoxy based primer with excellent corrosion protection properties for use on metal surfaces. It has high structural strength, abrasion and chemical resistance. The product offer extra protection against corrosion on bare or blasted metal.
Quick view
Close

Topxy Fix Primer 1170

Epoxy-polyamide based, two component primer containing zinc phosphate. It is specifically formulated for superior adhesion to a range of different substrates such galvanized steel, aluminum, stainless steel , and other steel surfaces.
Quick view
Close

Topthane PU 55700

Acrylic polyurethane resin-aliphatic isocyanate based, two component, gloss aliphatic polyurethane topcoat. Excellent adhesion and elasticity, high UV resistance, good gloss retention are the characteristic properties. It is resistant to broad range of corrosive and marine atmospheres.
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view
Close

Topxy Zinc 980

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. It provides cathodic protection if film is damaged. Service temperature range is 0-200°C. It has low volatile organic content. Zinc content in the dry film conforms to SSPC-Paint 20, Level 3 and ISO 12944 standards.
Quick view
Close

Topxy NF-4111

A solvent free, two components, high build, polyamine cured epoxy phenolic coating designed to protect substrates against severe chemical attack. Low viscosity and excellent adhesion characteristics ensure a tight bond to properly prepared concrete and steel surfaces. The product has High chemical resistance, low permeability, resist chipping or cracking and has an excellent Abrasion & Corrosion resistant. The product have excellent resistance to water, crude oil, diesel fuel, jet fuel (JP-8, Jet A1) and unleaded gasoline
Quick view
It is a two-component, epoxy paint used on metal & Concrete surfaces. It is a semi-glossy finish, with good resistance to abrasion, chemicals and water.
Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Top Tar EP-1000 is coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity.
Close

Top Tar EP-1000

Coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity. It has good resistance to immersion to soil chemicals. It has excellent durability against moisture and water.
Quick view
Close

Topxy Zinc 849

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. Service temperature range is 0-200°C. Zinc content in the dry film conforms to SSPC-Paint 20, Level 2 and ISO 12944 standards.
Quick view
Close

Topthane PU-55780-ZP

A polyurethane topcoat cured with aliphatic isocyanate. It has a high volume solids and contains zinc phosphate making it ideal for protection of structures in corrosive environments. It can be applied direct to metal. The product can be applied directly to the metal surface in C3 medium corrosive environments. Can be applied directly to galvanized and aluminum surfaces. Excellent adhesion and elasticity, color and gloss retention are the characteristic properties. It is resistant to broad range of corrosive and marine atmospheres. Can be applied in thick coats with low dry spray risk.
Quick view