Click to enlarge
Previous product
Top Floor PU 200 -SB
Top Floor PU 200 -SB
Back to products
Next product
Topxy NF-4111
Topxy NF-4111

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.

Categories: , Tags: , , , ,
Product Description

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100-150 micron per coat) as well as high builds (250 micron per coat).

Product Uses:
  • Potable water tanks (concrete or Metal)
  • Sea water tanks.
  • Water pipes
  • Valves coating
Properties: 
  • Corrosion, chemical and abrasion resistant
  • Solvent free – suitable for use in confined areas.
  • High build application.
  • Zero VOC
  • Easy to clean
Technical Data Sheets
English Data Sheet: Topxy Coating 5050 SF English Arabic Data Sheet: Topxy Coating 5050 SF Arabic

منتجات ذات صله

Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Close

Top Tar EP-1000

Coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity. It has good resistance to immersion to soil chemicals. It has excellent durability against moisture and water.
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view
Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Close

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.
Quick view
Close

Topxy Metal Primer 1500

A high-performance, two-component epoxy-based primer designed to deliver exceptional corrosion resistance on metal substrates. Engineered for superior structural integrity, it offers outstanding resistance to abrasion and chemicals. Ideal for application on bare or sandblasted metal surfaces, the product provides enhanced protection against corrosion in demanding environments.
Quick view
Close

Thermo Coat 115

A two-component, solvent-based epoxy resin paint resistant to temperatures up to 350°C. Thanks to its heat-resistant pigments, it will soften and darken when exposed to 350°C, but it is not flammable.
Quick view
Close

Topxy Mortar SF-075

It is two component, solvent free epoxy resin based repair, anchorage and fitting mortar. The product is fast drying anchorage, casting and repair mortar.
Quick view
Close

Top Mastic Epoxy 450-AL

Epoxy-polyamine based, two component, zinc phosphate and aluminum pigment containing, high built, self priming mastic coating with low volatile organic content (VOC).
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Close

Topxy Zinc E-811

A self-curing solvent based fast curing zinc silicate coating. . Zinc content in the dry film conforms to SSPC-Paint 20, Level 2 and ISO 12944 standards. It is resistant to cyclic dry temperatures up to 400°C.
Quick view
Close

Topxy Zinc 849

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. Service temperature range is 0-200°C. Zinc content in the dry film conforms to SSPC-Paint 20, Level 2 and ISO 12944 standards.
Quick view
Close

Topthane PU-55780-ZP

A polyurethane topcoat cured with aliphatic isocyanate. It has a high volume solids and contains zinc phosphate making it ideal for protection of structures in corrosive environments. It can be applied direct to metal. The product can be applied directly to the metal surface in C3 medium corrosive environments. Can be applied directly to galvanized and aluminum surfaces. Excellent adhesion and elasticity, color and gloss retention are the characteristic properties. It is resistant to broad range of corrosive and marine atmospheres. Can be applied in thick coats with low dry spray risk.
Quick view
Close

Topxy MIO Mastic Primer

Epoxy-polyamine based, two component, high built coating containing micaceous iron oxide (MIO) and zinc phosphate, self priming mastic coating with low volatile organic content (VOC).
Quick view
Close

Topthane PU 55700

An acrylic polyurethane resin – aliphatic isocyanate based, two-component, gloss aliphatic polyurethane topcoat, it is High-performance topcoat with excellent adhesion, elasticity, UV resistance, gloss retention, and resistance to corrosive and marine atmospheres.
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Floor PU 100 SB

One component, non-yellowing, aliphatic, moisture curing, polyurethane gloss coating. The product is UV resistance and have very good chemical and mechanical characterizes.
Quick view
Close

Topxy NF-4118 B

A novalac (phenolic) epoxy-polyamine based, two component, high-built coating with excellent chemical resistance. It is most often used in those applications where chemical, solvent and water resistance are required. It exhibits excellent curing characteristics at low temperatures (down to -5°C) and/or high humidity without any surface defects such as blushing, cracking etc.
Quick view