Click to enlarge
Previous product
Elasto Bitumen PU 4000
Back to products
Next product
Top Floor 600-SF

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.

Category: Tags: , , , , , , ,
Description

Top Floor TS 500-SB (Solvent Based Epoxy Sealer)

Two component transparent Solvent Based Epoxy Sealer for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.

Product uses:

Top Floor TS 500-SB is designed to be used as durable floor coating for high traffic areas, and can be used as primer for concrete floors & Walls. Also can be use it on cement plaster as primer under epoxy or polyurethane coatings.

 

 

 

Technical Data Sheets
English Data Sheet: Top Floor TS 500-SB English Arabic Data sheet: Top Floor TS 500-SB Arabic

Related products

Close

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.
Quick view
Close

Thermal Roof Coating

One component elastomeric acrylic resin-based flexible acrylic waterproofing & thermal insulation coating.
Quick view
Close

Top Floor AC-8080

Top Floor AC-8080 One-component acrylic coating is based on solvent and designed to provide breathable, water-repellent protection for concrete surfaces.
Quick view
Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesionfor other coats.
Close

Proof Tile Primer

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
A two component low viscous Marble &  granites Epoxy Resin used to fuse natural as well as artificial stone to fill porosity, hairline crack, major crack and hole.
Close

Topxy Resin 800 SF

A two component low viscous liquid used to fuse natural as well as artificial stone to fill porosity, hairline crack, major crack and hole. System will also enhance the color of natural stone as well as improve gloss.
Quick view
Close

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.  
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Top Floor PU 200 -SB

An aliphatic isocyanate based , two component, solvent borne, UV resistant, glossy top coating which is scratch resistant and have high color stability and have high mechanical abrasion  resistant.
Quick view
Close

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.    
Quick view
Close

Top Floor TS 700-WB

Two-pack high build water dispersed epoxy resin, which form a dust-proof, easily cleaned surface, which is resistant to most oils and liquids. The product is water based and low odor. It can also be used as a final coating and sealer for epoxy floor screeds to provide a more durable and easily cleaned surface where high impact is desirable. The product can be used as primer on damp areas or concrete surfaces that contains humidity.
Quick view
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Top Floor ORP 6000

It is a high viscosity, solvent free, two component, colored, orange peel textured, multi-purpose epoxy based coating.
Quick view
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Close

Top Fix CR 117-2K

Top Fix CR 117-2K It is a two-component chemical material used in both passive and active waterproofing. The material interacts
Quick view
Two-pack water dispersed epoxy Floor Coating, The product have Excellent adhesion to concrete surface and damp but not wet concrete.
Close

Top Floor FC 250-WB

Two-pack water dispersed epoxy Floor Coating, The product have Excellent adhesion to concrete surface and damp but not wet concrete. The Product have exceptional floor protection—and zero VOCs and have High-performance coating—for concrete floors in moderate to severe industrial settings. exceptionally hard-wearing, low-odour heavy duty floor coating ideal for heavy traffic areas. The product have very good outstanding resistance to oil, chemicals, solvents and abrasion. The product is easy-to-clean and Prevents the dusting of concrete surfaces.
Quick view
Close

Proof Guard AC 111

Proof Guard AC 111 A synthetic, solvent-based elastic coating that forms a seamless, non-porous, watertight film that repels water and
Quick view
Close

Top Floor 90-CR

Top Floor 90-CR is a high-performance, single-component floor coating. based on chlorinated rubber.  The product is weather resistance and have
Quick view
Close

Top Floor SL 1000

High quality self-leveling Flow applied three component coating for application to new and existing concrete & metal floors. It provides smooth, easily cleaned surfaces which is resistant to dirt, moisture, oil, and light-medium abrasion and chemical attack.
Quick view
Close

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.
Quick view