Click to enlarge
Previous product
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Waterproofing Catalog
Back to products
Next product
Thermocem 130
Thermocem 130

Road Guard 2K

A high-performance, solvent-free, two-component methyl methacrylate (MMA) road marking paint designed for long-lasting visibility and mechanical resistance. Suitable for highways, urban roads, parking lots, and industrial zones.

Categories: , Tags: , , , , , ,
Product Description

A high-performance, solvent-free, two-component methyl methacrylate (MMA) road marking paint designed for long-lasting visibility and mechanical resistance. Suitable for highways, urban roads, parking lots, and industrial zones.

Product uses:

-Lane markings on asphalt and concrete.
-Pedestrian crossings, arrows, symbols, and safety zones.
- High-traffic areas requiring rapid return to service.
Distinctive Features and Advantages
  • Rapid curing, even at low temperatures
  • Excellent adhesion to asphalt and concrete
  • UV-resistant and weatherproof
  • High mechanical and chemical resistance
  • Compatible with reflective glass beads

 

Technical Data Sheets
For Englsih data sheet please press on the link :RoadGuard 2K For Arabic Data sheet please press on the link : Road Guard 2K Arabic 

منتجات ذات صله

Close

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.
Quick view
Close

Proof Guard AC 111

Proof Guard AC 111 A synthetic, solvent-based elastic coating that forms a seamless, non-porous, watertight film that repels water and
Quick view
Close

Top Floor PU 100 SB

One component, non-yellowing, aliphatic, moisture curing, polyurethane gloss coating. The product is UV resistance and have very good chemical and mechanical characterizes.
Quick view
Close

Top Floor FC 300-SF

It is a two component heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish.  It is hard wearing epoxy floor coating offering excellent resistance to chemicals, solvents and oils. 
Quick view
Close

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.
Quick view
Close

Thermal Screed

Thermal Screed It is a screed material that allows the surface to breathe and provides heat, sound and fire insulation thanks to the natural lightweight aggregates with a porous structure in its cement-based mixture.
Quick view
Close

Proof Tile Primer

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Close

Duratrax 500

Duratrax 500 is a single-component, water-based floor coating formulated with pure acrylic binder. It provides a fast-drying, decorative, and durable finish for asphalt, concrete, and cement surfaces. Designed for interior and exterior use, it withstands vehicle traffic and is applied over epoxy transparent primer for optimal adhesion.
Quick view
Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Close

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.  
Quick view
Close

Top Floor 90-CR

Top Floor 90-CR is a high-performance, single-component floor coating. based on chlorinated rubber.  The product is weather resistance and have
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.    
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Close

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Close

Top Fix CR 117-2K

Top Fix CR 117-2K It is a two-component chemical material used in both passive and active waterproofing. The material interacts
Quick view