Click to enlarge
Previous product
Top Roof 500
Top Roof 500
Back to products
Next product
Top Poly MS
Top Poly MS

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.

 

Category: Tags: , , ,
Product Description

Top Roof G (Mineral & Polymer based waterproofing)

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.

Recommended use: Top Roof G (Mineral & Polymer based waterproofing)

  • As a waterproofing coating on concrete roofs & terraces.
  • As a decorative and waterproofing coating on concrete walkways.
  • As a protection coat over asphalt pavements.
  • The product can be used as Tennis courts & sport areas paint.
  • Can be used as decorative coating in parks & gardens.
  • can be used as wet areas insulation.
  • Under the ceramic surfaces in terraces, Balcones and wet areas like bathrooms and kitchens.

 

Technical Data Sheets
For Englsıh Data Sheet please press on the link:Top Roof G For Arabic Data sheet Please press on the link: Top Roof G Arabic

منتجات ذات صله

Close

Elasto Bitumen PU 6000 SF

A two component, polyurethane-bitumen modified, liquid waterproofing material. It is a fast curing product and it forms a very elastic film, which perfectly adhere to different surfaces. It is perfectly adhesive to almost all types of surfaces. It has excellent mechanical characteristics providing high tension, tearing and wearing resistance. It has excellent chemical resistance. Moreover, does not affected by water vapor transmission. The dry film of the product has the capability to breath and prevents the accumulation of humidity under the coat. It provides thick coating without bubbling. It provides high crack bridging. It has excellent covering and is adhesive to surface. It has high thermal resistance and can be used between +80°C and 200 °C. The film applied keeps its flexibility down to – 40 °C.
Quick view
Close

Hydro Shield 600

A single-component, acrylic and latex-based formulation designed for direct application on concrete and masonry surfaces. It requires no mixing and can be easily applied using a brush or roller. Its crystalline and hydrophobic properties prevent water from penetrating the concrete and walls, preventing it from penetrating the walls and preventing mold and moisture from forming for many years. It creates a fresh, odorless, and seamless surface.
Quick view
Close

Topflex PU 25

Topflex PU 25 Polyurethane Mastic is a high-performance, one-component sealant designed for flexible joint sealing and bonding applications. It cures upon exposure to atmospheric moisture to form a durable, elastic seal resistant to weathering, chemicals, and mechanical stress. Ideal for use in construction, automotive, and industrial settings.

Quick view
Close

Top Clear AC-7070

A Solvent based acrylate copolymer primer and penetrative water repellent protective treatment for concrete and masonry. It works by penetrating into the pores of concrete and reacting there with the moisture / water vapor present to form a hydrophobic poly acrylate lining to the capillaries. The product non-staining, allows water vapor to escape from the structure and Chemically resistant to ice melting compounds, fuels, oils and atmospheric contaminants.  
Quick view
Close

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.
Quick view
Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Close

Top sealer WR 7000-SB

Silicone based, solvent borne colorless surface protector and water repellent which prevents rainwater to flow in, by penetrating underneath the surface.
Quick view
Close

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.
Quick view
Close

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.    
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.
Quick view
Close

Weather Shield SI- 1150

High-quality, water-based exterior paint, the product is pure Acrylic copolymer resins and modified silicone resin based paint. The product is weather resistant, water repellent, have good resistance to bacterial growth, high hiding power and have color retention properties.
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Close

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view
It is a water based, acrylic  based dense concentrated Sealer with high strength penetration and adherence.
Close

Acrylic Concentrated Sealer

It is a water based, acrylic  based dense concentrated primer with high strength penetration and adherence. The product is odorless and  creates a binding bridge between paint and surface and  maximizes adherence of paint on surface and decreases the absorbency of the surface it is applied to. It prevents color waives occurring in top coat paint on surfaces with various characteristics of absorbency. Reduces the consumption of paint significantly. Performs high penetration ability; environmental friendly.
Quick view
Close

TOP Guard 100

Acrylic elastic waterproofing coating. it is one component elastomeric acrylic resin-based flexible acrylic waterproofing coating. The product have waterproofing impervious and elongation properties in addition to the strong bonding on most substrates. It forms a tough, flexible and durable coating which is resistant to UV and other weathering agents.
Quick view
Close

Top Sealer WR 5000-WB

is an Active water based component for formulating penetrating water repellent. The product gives penetration of absorbent surfaces due to small molecular structure provides added repellency. The product performs and pond on both neutral and alkaline substrates.it is also UV stable to increase the life of the treatment. it allow water vapor permeable but give resistant to liquid water.it is also very important to mention that penetrating treatment will not Change the appearance of the substrate at low solids levels.  
Quick view