Click to enlarge
Previous product
Carpet Bond SF
Carpet Bond SF
Back to products
Next product
Quartz Bond
Quartz Bond

UV Bond 1K

A one-component, solvent-free aliphatic polyurethane binder designed for stone carpet systems. It provides excellent UV stability, durability, and flexibility, ensuring long-term performance in both indoor and outdoor decorative flooring applications.

Category: Tags: , , , , , ,
Product Description

A one-component, solvent-free aliphatic polyurethane binder designed for stone carpet systems. It provides excellent UV stability, durability, and flexibility, ensuring long-term performance in both indoor and outdoor decorative flooring applications.

Product uses:

  • Stone carpet / pebble flooring systems (indoor & outdoor)
  • Decorative flooring in commercial, residential, and public spaces
  • Areas requiring durable, aesthetic, and easy-to-clean surfaces

Properties:

  • One-component → easy to use, no mixing required
  • Aliphatic polyurethane → non-yellowing, UV stable
  • Transparent finish → highlights natural stone colors
  • Excellent adhesion to mineral aggregates
  • High mechanical strength and abrasion resistance.
  • Flexible → accommodates substrate movement
  • Weather and chemical resistance

For more information about semilar product please visit our section for polyurathane products .

also please visit our Instagram page

Technical Data Sheets
For English data sheet please press the link : UVBond 1K English For Arabic data sheet please press the link : UVBond 1K Arabic

منتجات ذات صله

Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Close

Top Seal PU 711-PO

A self-leveling polyurethane sealant specifically formulated for horizontal surfaces. Its high elasticity enables it to accommodate continuous structural movements resulting from thermal fluctuations, effectively preventing cracking or loss of adhesion.
Quick view
Close

Duratrax 500

Duratrax 500 is a single-component, water-based floor coating formulated with pure acrylic binder. It provides a fast-drying, decorative, and durable finish for asphalt, concrete, and cement surfaces. Designed for interior and exterior use, it withstands vehicle traffic and is applied over epoxy transparent primer for optimal adhesion.
Quick view
Close

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.
Quick view
Close

NanoCure 2K

NanoCure 2K is a high-performance, two-component polyaspartic varnish designed for superior UV resistance, rapid curing, and long-term durability. It delivers a crystal-clear, glossy finish with exceptional abrasion and chemical resistance, making it ideal for decorative and industrial flooring systems.
Quick view
Close

Carpet Bond SF

Two-component, solvent-free epoxy binder designed for stone carpet / decorative aggregate provides strong adhesion, durability, and chemical resistance flooring systems.
Quick view
Close

Elasto Bitumen PU 4000

A single component bitumen modified polyurethane based liquid waterproofing material.  
Quick view
Close

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.  
Quick view
Close

UVBond 2K

A solvent-free, two-component aliphatic polyurethane binder specially formulated for stone carpet systems. It provides excellent UV resistance, flexibility, and durability, ensuring long-lasting performance in both indoor and outdoor decorative flooring applications.
Quick view
Close

Quartz Bond

A two-component, solvent-free epoxy flooring system formulated with colored quartz aggregates. Its microstructure ensures a seamless, uniform surface with high mechanical and chemical resistance. The product is designed for interior applications requiring durability, hygiene, and long-term performance. Available in multiple colors, it offers customizable solutions for demanding environments.
Quick view
Close

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.
Quick view
Close

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.
Quick view
Close

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.
Quick view
Close

UNIBIND PU 207

A single-component polyurethane resin designed specifically as a binder for SBR (Styrene-Butadiene Rubber) granules in flooring applications. It offers a high-performance solution for creating durable, elastic, and weather-resistant surfaces across a wide range of environments.
Quick view
Close

Top Floor PU 2020-SL

It is a self-leveling, flame retarder, two component hard elastic, thick layer polyurethane coating with high impact and abrasion resistance to acidic and basic solutions. The product can be applied in a thickness of 2-3 mm. This product is 100% solids, aromatic polyurethane-based resin that provides a seamless, wearing suitable for the traffic of wheeled vehicles.  
Quick view
Close

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.
Quick view
Close

Topxy Mortar SF-075

It is two component, solvent free epoxy resin based repair, anchorage and fitting mortar. The product is fast drying anchorage, casting and repair mortar.
Quick view
Close

Topxy Clear 2000

Is a solvent-free, two-component, high build polyamine cured epoxy varnish, which cures to a coating with excellent resistance to  water, Household detergents, oils, and to abrasion. It is used as protection coat in 3D epoxy flooring systems and also it can be used as a protection coat over decorative metallic and pearl epoxies.  
Quick view
Close

UNIBIND PU 407

A single-component polyurethane resin designed specifically as a binder for SBR & EPDM granules in flooring applications. It offers a high-performance solution for creating durable, elastic, and UV & weather-resistant surfaces across a wide range of environments.
Quick view
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view