Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air moisture to form a seamless, elastic, crack bridging and walkable membrane. This high-technology coating is UV-stable, non-yellowing, weather stable, alkali and chemical resistant and even after aging it remains transparent and elastic. It is resistant to water contact, weather conditions, sunlight, abrasion (foot traffic) and thermal variations (-30 to +80 0 C service temperature).

Product uses:

Transparent waterproofing of Balconies and Terraces.
Transparent waterproofing and protection of natural stones.
Transparent waterproofing of transparent plastics (e.g. polyacrylate, polycarbonate).
Transparent waterproofing and protection of wood.
Transparent waterproofing of ceramic surfaces.
Transparent waterproofing of glass.
Transparent waterproofing of glass-brick walls.

Properties:

UV-stable
Non-yellowing.
Resistant to water.
Abrasion resistant.
Resistant to water.
Temperature span of -40°C to +90°C. Resistant to frost.
Gives the surface a satin-matte finish

Click to enlarge

Previous product

Thermal Roof Coating

Back to products

Next product

Proof Tile Primer

Proof Tile PU 711-TR

Category: Polyurethane Based Waterproofing Products Tags: elastic, membrane, Polyurethane, ttccoating, waterproofing, waterproofing_coating

Product Description
Technical Data Sheets

Product Description

Technical Data Sheets

English Data sheet : Proof Tile PU 711-TR Arabic Data sheet : Proof Tile PU 711-TR Arabic

منتجات ذات صله

Top Floor FC 200-SB

Two-pack epoxy floor coating offering good chemical resistance, durability and available in a variety of colors.

Quick view

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.

Road Marking Paint CR

A high quality, single backed alkyd modified chlorinated rubber paint that is specially designed for road marking.

Proof Guard PL 200 – C

A solvent free tow component, easy and cold applied polyuria water proofing material. The material cures rapidly and forms a bubble free membrane in less than 2 hours. This product, upon polymerization, gives an elastic, seamless coating, fully bonded to the substrate. It is based on pure elastomeric hydrophobic resins, which result in excellent mechanical, chemical, thermal and natural element resistance properties.

Proof Guard PU 1200 SF

It is a two component, polyurethane based, solvent free, highly elastic, decorative, liquid waterproofing membrane with crack bridging capability. It forms a seamless, long lasting water impermeable membrane. It is applied very easily and It can tolerate minor building movements and newly formed cracks.

Proof Guard PU 500 LV

It is one component, ready to use, highly elastic, cold applied polyurethane waterproofing which cures into a membrane with excellent abrasion, mechanical, chemical, thermal, and UV resistance.

Top sealer WR 7000-SB

Silicone based, solvent borne colorless surface protector and water repellent which prevents rainwater to flow in, by penetrating underneath the surface.

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.

Top Floor TS 500-SB

Two component Solvent based transparent epoxy coating for sealing and water proofing concrete, masonry and wood surfaces. It has excellent penetrating properties and is designed to be used as sealer coat or varnish for concrete surfaces. Can be used as primer or finish coat in a complete system in atmospheric environments.

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.

Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.

Top Fix CR 117-2K

Top Fix CR 117-2K It is a two-component chemical material used in both passive and active waterproofing. The material interacts

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.

Top Seal PU 900-INJ

A single component, Solvent Free, polyurethane based injection material, specifically designed for sealing and waterproofing the joints and cracks in concrete subjected to structural movements. The single component system reacts with water to form foam that expands filling the void and forming a tight, impermeable elastomeric seal, stopping the water flow.

Top Floor TS 700-WB

A two component, multifunctional, water based epoxy primer consist of epoxy resin and curing agent binder, giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties for porous substrates like concrete.

Topxy Metal Primer 1500

A high-performance, two-component epoxy-based primer designed to deliver exceptional corrosion resistance on metal substrates. Engineered for superior structural integrity, it offers outstanding resistance to abrasion and chemicals. Ideal for application on bare or sandblasted metal surfaces, the product provides enhanced protection against corrosion in demanding environments.

Top Floor 650-MT

Two component solvent free, moisture tolerant epoxy Sealer designed to be applied to concrete with residual moisture or green concrete.

Top Floor 600-SF

Two component solvent free transparent epoxy coating which used as a sealer on concrete surfaces and cement based surfaces.

Top Prime MMA 2011

Is a one-component, air-drying, dust-preventing, and impregnating, Methyl Methacrylate (MMA) based surface protection and primer resin that can be applied indoors and outdoors, on floor and wall surfaces. It has a quick drying time. (Average within 1 hour) It is very long lasting. It is very easy to apply. It is non-toxic. Since it penetrates to the pores of the surface, it stops the dusting that will occur inside the surface. It increases the appearance quality of the applied surface. It protects the applied surface very effectively, especially against atmospheric conditions, by preventing erosion (for example, UV rays, rain, etc.) by allowing the surface to breathe. It can be used vertically and horizontally on concrete, exposed concrete, brick, natural stone and mosaic surfaces. It does not form a film layer. It increases the appearance quality of the surface. It is also used as an undercoat in MMA-based construction chemical products applied to such surfaces.

Pool Paint

A two-component, aliphatic polyurethane coating especially designed for properly prepared concrete, fiberglass and steel pools. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. The product can be applied directly to a variety of substrates, including properly prepared epoxy coatings.