Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Click to enlarge
Previous product
Top Floor PU 220 SB An aliphatic polyurethane coating suitable for protecting floor surfaces in outdoor areas. The product is UV stable and none yellowing.
Top Floor PU 200 -SB
Back to products
Next product
Topxy NF-4111

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.

Categories: , Tags: , , , ,
Description

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (100-150 micron per coat) as well as high builds (250 micron per coat).

Product Uses:
  • Potable water tanks (concrete or Metal)
  • Sea water tanks.
  • Water pipes
  • Valves coating
Properties: 
  • Corrosion, chemical and abrasion resistant
  • Solvent free – suitable for use in confined areas.
  • High build application.
  • Zero VOC
  • Easy to clean
Technical Data Sheets
English Data Sheet: Topxy Coating 5050 SF English Arabic Data Sheet: Topxy Coating 5050 SF Arabic

Related products

Close

Topxy MIO Mastic Primer

Epoxy-polyamine based, two component, high built coating containing micaceous iron oxide (MIO) and zinc phosphate, self priming mastic coating with low volatile organic content (VOC).
Quick view
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Chemical material used in both negative and positive waterproofing. It form crystalline crystals that block the capillary pores of the concrete.
Close

Top Fix CR 117-2K

Top Fix CR 117-2K It is a two-component chemical material used in both passive and active waterproofing. The material interacts
Quick view
An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties.
An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties.
Close

Top Floor FB 700

An economic solvent free, two-pack epoxy primer for concrete and cement floors with good penetration and filling properties. The product contains performance enhancing fillers and can be used as a primer or surface leveler for uneven concrete surfaces.
Quick view
Close

Topxy Fix Primer 1170

Epoxy-polyamide based, two component primer containing zinc phosphate. It is specifically formulated for superior adhesion to a range of different substrates such galvanized steel, aluminum, stainless steel , and other steel surfaces.
Quick view
Close

Topxy Metal Primer 1550 ZC

Epoxy-polyamide based, two component primer containing zinc phosphate. It is specifically designed for fast dry even at low temperatures and excellent durability in both marine and industrial environments.
Quick view
It is consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product.
It is consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product.
Close

Top Roof G

It is an acrylic polymer components based, ready for use single component, strong adhesion with excellent water resistance and UV resistance waterproofing material. The product consisted of mineral fillers and special polymer to give a very good wearing resistance more than any equivalent product. The product has excellent resistance to UV, snow, rain and water and it is also environment friendly.  
Quick view
Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesionfor other coats.
Close

Proof Tile Primer

Proof Tile Primer : Transparent, single-component adhesion promoter that chemically activates ceramic and glass surfaces providing excellent adhesion to the
Quick view
Top Floor PU 220 SB An aliphatic polyurethane coating suitable for protecting floor surfaces in outdoor areas. The product is UV stable and none yellowing.
Top Floor PU 200-SB An aliphatic polyurethane coating suitable for protecting floor surfaces in outdoor areas. The product is UV stable and none yellowing.
Close

Top Floor PU 200 -SB

An aliphatic isocyanate based , two component, solvent borne, UV resistant, glossy top coating which is scratch resistant and have high color stability and have high mechanical abrasion  resistant.
Quick view
Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness.
Close

Top Floor SL 2000

Is a three-component solvent free 100% solid self-smoothing epoxy resin compound in high gloss seamless finish applied at 2-7mm thickness. It is to be used on prepared and primed concrete floor in medium to heavy duty industrial environment. The product gives heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture in combination with non-slip aggregates. This product may be top coated if required.
Quick view
Hammertone Paint  is a fast-drying, solvent-based topcoat paint with a hammerton pattern. The product can be applied directly on metal without primer.
Close

Hammertone Paint

Hammertone Paint  is a fast-drying, solvent-based topcoat paint with a hammerton pattern, containing an anticorrosive pigment mixture with a modified
Quick view
Close

Topxy Zinc 980

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. It provides cathodic protection if film is damaged. Service temperature range is 0-200°C. It has low volatile organic content. Zinc content in the dry film conforms to SSPC-Paint 20, Level 3 and ISO 12944 standards.
Quick view
Close

Topxy Metal Primer 1500

A two component, epoxy based primer with excellent corrosion protection properties for use on metal surfaces. It has high structural strength, abrasion and chemical resistance. The product offer extra protection against corrosion on bare or blasted metal.
Quick view
It is a two component heavy duty Solvent Free Epoxy Coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish.
It is a two component heavy duty Solvent Free Epoxy Coating that provides a high gloss, seamless, hygienic surface , durable, Antimicrobial Finish.
Close

Top Floor FC 300-SF

It is a two component heavy duty floor coating that provides a high gloss, seamless, hygienic surface that is extremely hard wearing, durable, Antimicrobial Finish.  It is hard wearing epoxy floor coating offering excellent resistance to chemicals, solvents and oils. 
Quick view
Close

Topxy Zinc 849

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. Service temperature range is 0-200°C. Zinc content in the dry film conforms to SSPC-Paint 20, Level 2 and ISO 12944 standards.
Quick view
Close

Topthane PU-55780-ZP

A polyurethane topcoat cured with aliphatic isocyanate. It has a high volume solids and contains zinc phosphate making it ideal for protection of structures in corrosive environments. It can be applied direct to metal. The product can be applied directly to the metal surface in C3 medium corrosive environments. Can be applied directly to galvanized and aluminum surfaces. Excellent adhesion and elasticity, color and gloss retention are the characteristic properties. It is resistant to broad range of corrosive and marine atmospheres. Can be applied in thick coats with low dry spray risk.
Quick view
Close

Topxy HB Epoxy Metal Primer 1490

epoxy based, two component, high built coating containing zinc phosphate. It is specifically designed for fast dry even at low temperatures (down to -5°C).
Quick view
Solvent-free, two component epoxy coating system with orange peel appearance that can be light, medium or aggressive.
Close

Top Floor ORP 6000

It is a high viscosity, solvent free, two component, colored, orange peel textured, multi-purpose epoxy based coating.
Quick view
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating for waterproofing .
Close

Proof Tile PU 711-TR

Proof Tile PU 711-TR is a transparent, hard-elastic, one component aliphatic polyurethane, high-solids coating. After application the material cures with air
Quick view
Close

Top Mastic Epoxy 450-AL

Epoxy-polyamine based, two component, zinc phosphate and aluminum pigment containing, high built, self priming mastic coating with low volatile organic content (VOC).
Quick view
Top Tar EP-1000 is coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity.
Close

Top Tar EP-1000

Coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity. It has good resistance to immersion to soil chemicals. It has excellent durability against moisture and water.
Quick view