Top Tar EP-1000 is coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity.
Click to enlarge
Previous product
Toptherm HR 38600-AL
Back to products
Next product
It is a high-strength, normal-setting, cement-based, self-leveling underlayment, for use over interior concrete, plywood and other approved floor surfaces.
Top Floor CM 3-10

Top Tar EP-1000

Coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity. It has good resistance to immersion to soil chemicals. It has excellent durability against moisture and water.

التصنيفات: ,
الوصف

Top Tar EP-1000 is coal tar modified epoxy-polyamine based, two component coating with excellent adhesion and elasticity. It has good resistance to immersion to soil chemicals. It has excellent durability against moisture and water.

RECOMMENDED USE:

It is used in the protection of steel pipes and concrete structures buried in water and soil. And in the insulation of tanks and treatment plants. It can be applied alone or over epoxy primer and intermediate coats. It has high resistance to abrasion, rust, salt water and chemicals.

Technical Data Sheets
For English Data sheet please press : Top Tar EP-1000

منتجات ذات صلة

Close

Topxy MIO Mastic Primer

Epoxy-polyamine based, two component, high built coating containing micaceous iron oxide (MIO) and zinc phosphate, self priming mastic coating with low volatile organic content (VOC).
Quick view
Close

Topxy NF-1420 HT

It is a solvent free two component, rust-inhibitive, phenolic resin, polyamide cured epoxy coating for professional use in industrial and commercial applications. Specially recommended to pipe lines and tanks (heating & cooling) where the heat resistance require between - 40 °C up to + 300 °C.
Quick view
Close

Top Mastic Epoxy 450-AL

Epoxy-polyamine based, two component, zinc phosphate and aluminum pigment containing, high built, self priming mastic coating with low volatile organic content (VOC).
Quick view
Close

Topxy NF-4111

A solvent free, two components, high build, polyamine cured epoxy phenolic coating designed to protect substrates against severe chemical attack. Low viscosity and excellent adhesion characteristics ensure a tight bond to properly prepared concrete and steel surfaces. The product has High chemical resistance, low permeability, resist chipping or cracking and has an excellent Abrasion & Corrosion resistant. The product have excellent resistance to water, crude oil, diesel fuel, jet fuel (JP-8, Jet A1) and unleaded gasoline
Quick view
It is a two-component, epoxy paint used on metal & Concrete surfaces. It is a semi-glossy finish, with good resistance to abrasion, chemicals and water.
Close

Topxy Enamel 415

It is a two-component, epoxy resin based, top coat paint used on metal & Concrete surfaces. It is a semi-glossy finish, supplied in two-pack form with good resistance to abrasion, chemicals, water, fats, oils, pedestrian.
Quick view
Close

Topxy Fix Primer 1170

Epoxy-polyamide based, two component primer containing zinc phosphate. It is specifically formulated for superior adhesion to a range of different substrates such galvanized steel, aluminum, stainless steel , and other steel surfaces.
Quick view
Close

Topxy Metal Primer 1550 ZC

Epoxy-polyamide based, two component primer containing zinc phosphate. It is specifically designed for fast dry even at low temperatures and excellent durability in both marine and industrial environments.
Quick view
Close

Topxy HB Epoxy Metal Primer 1490

epoxy based, two component, high built coating containing zinc phosphate. It is specifically designed for fast dry even at low temperatures (down to -5°C).
Quick view
Close

Top Mastic Epoxy 450

It is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete . Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack    
Quick view
Close

Topxy Zinc 980

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. It provides cathodic protection if film is damaged. Service temperature range is 0-200°C. It has low volatile organic content. Zinc content in the dry film conforms to SSPC-Paint 20, Level 3 and ISO 12944 standards.
Quick view
Close

Topthane PU-55780-ZP

A polyurethane topcoat cured with aliphatic isocyanate. It has a high volume solids and contains zinc phosphate making it ideal for protection of structures in corrosive environments. It can be applied direct to metal. The product can be applied directly to the metal surface in C3 medium corrosive environments. Can be applied directly to galvanized and aluminum surfaces. Excellent adhesion and elasticity, color and gloss retention are the characteristic properties. It is resistant to broad range of corrosive and marine atmospheres. Can be applied in thick coats with low dry spray risk.
Quick view
Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Close

Topxy Coating 5050 SF

Topxy Coating 5050 SF is a two component, polyamine based epoxy specifically for potable water tanks. It is high solids, high-build potable water coating.
Quick view
Close

Topxy Zinc 849

Epoxy based, two component micronized zinc dust containing primer with outstanding resistance to severe weathering. Service temperature range is 0-200°C. Zinc content in the dry film conforms to SSPC-Paint 20, Level 2 and ISO 12944 standards.
Quick view
Close

Topxy Metal Primer 1500

A two component, epoxy based primer with excellent corrosion protection properties for use on metal surfaces. It has high structural strength, abrasion and chemical resistance. The product offer extra protection against corrosion on bare or blasted metal.
Quick view
Close

Topxy Zinc E-811

A self-curing solvent based fast curing zinc silicate coating. . Zinc content in the dry film conforms to SSPC-Paint 20, Level 2 and ISO 12944 standards. It is resistant to cyclic dry temperatures up to 400°C.
Quick view
Close

Topthane PU 55700

Acrylic polyurethane resin-aliphatic isocyanate based, two component, gloss aliphatic polyurethane topcoat. Excellent adhesion and elasticity, high UV resistance, good gloss retention are the characteristic properties. It is resistant to broad range of corrosive and marine atmospheres.
Quick view
Close

Topxy NF-4118 B

A novalac (phenolic) epoxy-polyamine based, two component, high-built coating with excellent chemical resistance. It is most often used in those applications where chemical, solvent and water resistance are required. It exhibits excellent curing characteristics at low temperatures (down to -5°C) and/or high humidity without any surface defects such as blushing, cracking etc.
Quick view